E5406zl Layer3 Problem.. Help

[ranto]

Hello,

My switch E5406zl running act as Layer2 switch.

Now I want to change it as a core switch, where it act as gateway for LAN.

Port A8 set as uplink with IP Address 10.1.1.2/30

ip route 0.0.0.0 0.0.0.0 10.1.1.1

ip dns server-address priority 1 10.20.40.20
ip dns server-address priority 2 10.20.40.40

I create VLAN10 with IP Address 10.10.10.1/24, port A7 mode untagged.

And PC with IP 10.10.10.2/24

From switch, I can ping to gateway 10.1.1.1, the same when I ping to host like yahoo.com or other.

But there is problem when I test from PC direct to port A7:

It can ping to 10.10.10.1. But can't ping to 10.1.1.2.

certainly, it can't connect to the Internet.

Please help me, what causing it?

Thanks,

Ranto

[Ian Vaughan]

Howdy,
PC itself needs a default gateway set (10.10.10.1should do it)
Rest of the world needs to know that to get to the 10.10.10.0/24 network that they need to go via 10.1.1.1
Ta
Ian

[ranto]

Lately reply.

---

@Ian Vaughan wrote:
Howdy,
PC itself needs a default gateway set (10.10.10.1should do it)
Rest of the world needs to know that to get to the 10.10.10.0/24 network that they need to go via 10.1.1.1
Ta
Ian

---

This is very embarassing for me... 

It's just enable mode routing.. :LOL

#ip routing

Thank you.