HPE Community
Operating System - HP-UX
1752600 Members
4980 Online
108788 Solutions
New Discussion

Re: Core dump SIGBUS getHostFibreIn

 
Steven Hacker
New Member

‎08-30-2001 09:22 AM

‎08-30-2001 09:22 AM

Core dump SIGBUS getHostFibreIn

I get core dumps in the system and file info is like this:- core: core file from 'getHostFibreIn' - received SIGBUS

The system has EMC storage connected through Fiber switches.
0 Kudos
Reply
1 REPLY 1
Sridhar Bhaskarla
Honored Contributor

‎08-30-2001 09:44 AM

‎08-30-2001 09:44 AM

Re: Core dump SIGBUS getHostFibreIn

SIGBUS error corresponding to I/O might be basically due to the accessing of physical address in memory not corresponding to any device.

Did you try running ioscan -f and see if there are any devices listed with NO_HW status?.

If so, you need to check your EMC/cards/connections to see if anything happened.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.