3Com 8760

[WAMC]

When 8760 boots the following

ar531x rev 0x00005742 firmware startup...
SDRAM TEST...PASSED
Boot-Shim Version: 1.0.0
Boot-Shim Booting...

The Pressed-time of Reset Button is 0 seconds

Selecting SoftwareLoad Now!

Selected the FAT SoftwareLoad!
Starting at 0xbe060000...

ar531x rev 0x00005742 firmware startup...
SDRAM TEST...PASSED
Boot Code version: 1.2.1

 0
auto-booting...

Attached TCP/IP interface to ae0.
Warning: no netmask specified.
Attaching network interface lo0... done.
Attaching to TFFS... Attaching to TFFS... done.

Wait for reset , 4 ..3 ..2..1..0

Loading /fl/dflt-img.bin...
Cannot open "/fl/dflt-img.bin".
Boot web up ...

Won't go past this

Is ther a key sequence to break out of the auto boot

Has anyone else been able to resolve this problem.

[Infra_HDC]

Hello, WAMC!

I had the same problem, and there is my solution:

1. Power on your Access Point

ar531x rev 0x00005742 firmware startup...
SDRAM TEST...PASSED
Boot-Shim Version: 1.0.0
Boot-Shim Booting...
 
The Pressed-time of Reset Button is 0 seconds
 
Selecting SoftwareLoad Now!
 
Selected the FAT SoftwareLoad!
Starting at 0xbe060000...
 
 
ar531x rev 0x00005742 firmware startup...
SDRAM TEST...PASSED
Boot Code version: 1.2.1

2. Interrupt boot process by pressing Esc key immediately after beginning of reverse counting
 
 4  3 <Esc>

3. Press Enter key twice to go to boot console

[Boot]:  
[Boot]:

4. Print boot parameters

[Boot]: p
 
boot device          : tffs:
unit number          : 0  
processor number     : 0  
file name            : /fl/dflt-img.bin
inet on ethernet (e) : 192.168.1.1:0xffffff00
flags (f)            : 0x0  
target name (tn)     : s=factory
other (o)            : ae

5. Change boot parameters

[Boot]: c
 
'.' = clear field;  '-' = go to previous field;  ^D = quit
 
boot device          : tffs:0  
processor number     : 0  
host name            :  
file name            : /fl/dflt-img.bin /fl/3com-img.bin
inet on ethernet (e) : 192.168.1.1:0xffffff00  
inet on backplane (b):  
host inet (h)        :  
gateway inet (g)     :  
user (u)             :  
ftp password (pw) (blank = use rsh):  
flags (f)            : 0x0  
target name (tn)     : s=factory  
startup script (s)   :  
other (o)            : ae

E.g. we are changing "file name" parameter to value selected as bold.

6. Contiunue normal boot process

[Boot]: @
Attached TCP/IP interface to ae0.
Warning: no netmask specified.
Attaching network interface lo0... done.
Attaching to TFFS... Attaching to TFFS... done.
 
Wait for reset , 4 ..3 ..2..1..0
 
Loading /fl/3com-img.bin...Boot web up ...  
18984 + 2443552 + 105600
Starting at 0x80880000...
 
Please check the ethernet cable on port 0!
ar5212GetMacAddr: EEPROM MAC xx:xx:xx:xx:xx:xx
 
ar5212GetMacAddr: EEPROM MAC xx:xx:xx:xx:xx:xx
 
ar5212GetMacAddr: EEPROM MAC xx:xx:xx:xx:xx:xx
 
ar5212GetMacAddr: EEPROM MAC xx:xx:xx:xx:xx:xx
 
ar5212GetMacAddr: EEPROM MAC xx:xx:xx:xx:xx:xx
 
ar5212GetMacAddr: EEPROM MAC xx:xx:xx:xx:xx:xx
 
ar5212GetMacAddr: EEPROM MAC xx:xx:xx:xx:xx:xx
 
ar5212GetMacAddr: EEPROM MAC xx:xx:xx:xx:xx:xx
 
Attached TCP/IP interface to ae unit 0
Attaching interface lo0...done
                                           /fl/  - Volume is OK  
Attached TCP/IP interface to ae unit 0
Attached TCP/IP interface to ar unit 0x0200
Attached TCP/IP interface to ar unit 0x0201
Attached TCP/IP interface to ar unit 0x0202
Attached TCP/IP interface to ar unit 0x0203
Attached TCP/IP interface to ar unit 0x1300
Attached TCP/IP interface to ar unit 0x1301
Attached TCP/IP interface to ar unit 0x1302
Attached TCP/IP interface to ar unit 0x1303
Attached TCP/IP interface to wds unit 0x0000
Attached TCP/IP interface to wds unit 0x0001
Attached TCP/IP interface to wds unit 0x0002
Attached TCP/IP interface to wds unit 0x0003
Attached TCP/IP interface to wds unit 0x0004
Attached TCP/IP interface to wds unit 0x0005
Attached TCP/IP interface to wds unit 0x1000
Attached TCP/IP interface to wds unit 0x1001
Attached TCP/IP interface to wds unit 0x1002
Attached TCP/IP interface to wds unit 0x1003
Attached TCP/IP interface to wds unit 0x1004
Attached TCP/IP interface to wds unit 0x1005
Username:  
Active scanning 2.4GHz 54Mbps channels for 6 seconds...
 
Active scanning 2.4GHz 108Mbps (Turbo) channels for 1 seconds...
Auto Channel Scan selected 2412 MHz, channel 1
Ready
 
add bridge port ae0  
 
remove bridge port ae0
 
add bridge port ae0

7. Check state of your Access Point

7.1. POWER led change color from blinking orange to permanent green

7.2. LAN led change color from off to permanent/blinking green

7.3. Administrative IP address is accessible from ping command and from web browser

7.4. Wireless clients have access from Wi-Fi to your LAN

8. Disclaiming

All described manipulations is on your risk.

[Infra_HDC]

Hello! I have this problem second time, with the same model of AP. And suggested solution was helpful.