LoadRunner Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

Does LoadRunner 11.52 support Siebel 8.2.2 by using Siebel Web protocol?

Occasional Visitor

Does LoadRunner 11.52 support Siebel 8.2.2 by using Siebel Web protocol?

When I replay the "Siebel - Web" protocol script, some errors occur:

 

Action.c(164): web_url("start.swe_7") started  [MsgId: MMSG-26355]

Action.c(164): Warning -26378: No buffer having "RelFrameID=1.2.1" has been received. The web_reg_save_param/reg_find request(s) specifying this RelFrameID will be handled as "not found"    [MsgId: MWAR-26378]

Action.c(164): Error -26377: No match found for the requested parameter "Siebel_SWEACn18". Check whether the requested boundaries exist in the response data. Also, if the data you want to save exceeds 1024 bytes, use web_set_max_html_param_len to increase the parameter size               [MsgId: MERR-26377]

Action.c(164): Error -26377: No match found for the requested parameter "Siebel_SWEVLC". Check whether the requested boundaries exist in the response data. Also, if the data you want to save exceeds 1024 bytes, use web_set_max_html_param_len to increase the parameter size               [MsgId: MERR-26377]

Action.c(164): web_url("start.swe_7") highest severity level was "ERROR", 248 body bytes, 226 header bytes     [MsgId: MMSG-26388]

Ending action Action.

1 REPLY
Highlighted
HPE Expert

Re: Does LoadRunner 11.52 support Siebel 8.2.2 by using Siebel Web protocol?

Hi,

The latest officially supported Siebel version is 8.1