LoadRunner Support Forum
Showing results for 
Search instead for 
Do you mean 

Controller is noy able to connect to loadgenerator

Occasional Contributor

Controller is noy able to connect to loadgenerator

Hi,

 

I have one problem ,any help will be appreciated.

 

I have Load runner controller 11 controller in Machine A(Win 7 64 bit).

The same machine is having load generator also.

I have installed Load generator 11 in a different machine B(Win 7 32 bit).

 

When i run a scenario with local host as load generator ,everything goes fine.

But when i try to use Machine B as load generator below exception comes.

 

07/09/2012 21:29:47 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:29:47 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:29:47 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:30:02 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:30:02 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:30:02 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:30:18 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:30:18 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:30:18 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:30:33 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:30:33 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:30:33 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:30:48 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

07/09/2012 21:30:48 Error: Two Way Communication Error: Function two_way_comm_create_acceptor failed.     [MsgId: MERR-60999]

07/09/2012 21:30:48 Error: Process "lr_bridge.exe" was not created. Reason: communication error.      [MsgId: MERR-29996]

07/09/2012 21:32:53 Error: Communication error: An error occurred while calling the CreateFileMapping function. (sys error message - Access is denied.

)     [MsgId: MERR-10344]

5 REPLIES
HPE Expert

Re: Controller is noy able to connect to loadgenerator

You could refer to this knowledge base doc - http://support.openview.hp.com/selfsolve/document/KM214124.

If this document does not help, you may need to commit a support case.

 

Good Luck

Senior Member

Re: Controller is noy able to connect to loadgenerator

this document said "You are not authorized to view this document"

Valued Contributor

Re: Controller is noy able to connect to loadgenerator

You need to have authorized HP credentials to view KB.

 

just want to make sure, is the LoadRunner agent process running on the LG (Machine B)? if yes, is it running as a service or process?

 

same question for controller also, is it running as service or process?

 

Regards, Aj

Advisor

Re: Controller is noy able to connect to loadgenerator

Is their a solution, I have the same problem with LR 11.52?

 

Jens

 

Occasional Visitor

Re: Controller is noy able to connect to loadgenerator

I have the same problem. Any followup since February?