MSM Series
Showing results for 
Search instead for 
Do you mean 

MSM760 won't relay DHCP

Occasional Advisor

MSM760 won't relay DHCP

[ Edited ]

This thing is about to drive me nuts. I can only get the HTML authentication to work when I turn on the DHCP server of the MSM760, and then it only works for local clients and not AD. When I try to relay to our existing DHCP (Server 2008 R2) the clients do not get an address. I can ping the DHCP (DNS and DC) server from the 760. DHCP works fine until I turn on the "tunnel all traffic" and then I never get DHCP. The VSC I am trying this on is on the same VLAN as the 760 lan port & DHCP server for simplicity sake.

Attached is a map of the network as it stands.

Any ideas???

 

P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. -HP Forum Moderator

4 REPLIES
Valued Contributor Valued Contributor

Re: MSM760 won't relay DHCP

What version of firmware are you running?
Occasional Advisor

Re: MSM760 won't relay DHCP

Firmware 5.3.3.83-01-7739-A
Valued Contributor Valued Contributor

Re: MSM760 won't relay DHCP

Do you have the box checked to allow wireless clients to talk with wired? It would be in you VSC setting.
Highlighted
Occasional Advisor

Re: MSM760 won't relay DHCP

Yes the "Allow traffic between wired clients and tunneled wireless clients" box is checked but it still will not relay the DHCP information.