M and MSM Series
1748169 Members
4256 Online
108758 Solutions
New Discussion

Re: MSM765 + HP560 issue

 
SOLVED
Go to solution
Nythe
Occasional Contributor

MSM765 + HP560 issue

We have a MSM765 controller running firmware version: 6.5.0.1-19720, on this controller we have about 40 HP560 access points and 60 460 access points.

 

The issue im having at the momnet is the 560's dont seem to display the wireless clients correctly. It seems to not remove a client if they leave. This will make the AP's max out and go over the limit of 30 ive set. It still seems to accept new clients but after a while it will just start refusing clients and I can never tell how much an ap is actually getting utilized since its always says it has 50 odd clients connected to it.

 

is there any known issues with MSM765 and the 560's?

3 REPLIES 3
Arimo
Respected Contributor
Solution

Re: MSM765 + HP560 issue

Hi Nythe

 

First of all, upgrade to 6.5.1.0. Do you still see the same problem?

 

 

 


HTH,

Arimo
HPE Networking Engineer
Nythe
Occasional Contributor

Re: MSM765 + HP560 issue

Hey Arimo,

 

I have upgraded the firmware and I think that it has fixed the issue. Thanks

 

I have noticed now that when I restart the controller it takes about 30 mins for all the AP's to be discovered when previously it only took about 5 mins.. weird.

Arimo
Respected Contributor

Re: MSM765 + HP560 issue

Hi Nythe

 

De nada :-)

 

We've had issues with long acceptance time with some FW versions, but I haven't heard about that with 6.5.1. Please call the support so we can get this under investigation.


HTH,

Arimo
HPE Networking Engineer