MSM Series
Showing results for 
Search instead for 
Do you mean 

Teaming two MSN 765ZL wireless controllers

Occasional Advisor

Teaming two MSN 765ZL wireless controllers

Dears,

 

i am trying to team two MSM 765ZL modules and i am not able to do that..please help me in this since it is very urgent to my client...

the two cores are connected with a 10 gig trunk cable.

 

if you have any good document with pictures and the exact steps to do it, will be much better.

 

hope to hear from you soon.

 

regards,

Moh

6 REPLIES
Occasional Advisor

Re: Teaming two MSN 765ZL wireless controllers

the controllers running the latest code which is 5.7.1.1-12533
Honored Contributor

Re: Teaming two MSN 765ZL wireless controllers

Been a few years since I did this last but... make sure the LAN ports are in the same subnet and reachable from the other controller, and configure one of the controllers as team master. Maybe need to reboot the other controller before it can join. Its outlined pretty good in the documents I think.

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

Highlighted
Occasional Advisor

Re: Teaming two MSN 765ZL wireless controllers

actually, everything working fine with the physcal connections but i am not sure if i did it correctly.

 

the teaming configured correctly but the manager controller deteced the member but it halts on the waiting for acceptance status...not sure why,,any clues???

Occasional Advisor

Re: Teaming two MSN 765ZL wireless controllers

i am getting this error message on the controller:

 

can't get SC team member info from mac address

Occasional Advisor

Re: Teaming two MSN 765ZL wireless controllers

Did you solve this Problem?

 

i have got the same problem today.

2 Controller; first one upgarde to team manager; second controller joined to the team.

 

err cfg2openvpn-server: Could not get SC team member info from MAC address.
info cfg2openvpn-server: SC team member config not found yet. Retrying....

 

Martin

Trusted Contributor

Re: Teaming two MSN 765ZL wireless controllers

[ Edited ]

1. Ensure your Default Route points to LAN or Internet port subnet - not to a VLAN

2. With the member controller only  provide appropriate IP addresses and Default Route - no other configuration

3. If you have MSM765 controllers, ensure there's no rate-limiting in the controller ports

 

That should do it.


HTH,

Arimo
HPE Networking Engineer