My Learning Certification
1747999 Members
4800 Online
108756 Solutions
New Discussion

Re: Load Runner certification exam details

 
VijayReddy123
Advisor

to write "HP0-M48" certification exam

Hi Team,

 

I want know the important topics to write "HP0-M48" certification exam.

 

Thanks,

Vijay...

 

 

P.S. This post has been split off from other thread and edited its subject. - HP Forum Moderator

11 REPLIES 11
TheMasster
Frequent Advisor

Re: to write "HP0-M48" certification exam

Hi Vijay,

The important topics to write "HP0-M48" certification exam are listed, along with their relative weights, in the Exam Preparation Guide - here attached for your convenience.

 

Kind Regards

The Masster

 

 

msissons
Respected Contributor

Re: to write "HP0-M48" certification exam

Hi, TheMasster has a great response and also helped contribute to this great Knowledge Base article that might help.

 

 

http://h30499.www3.hp.com/t5/HP-ExpertOne-Certification-Blog/HP-LoadRunner-11-00-Certifications-HP-ExpertOne/ba-p/6044167#.UpqQt8RDub0

 

Best wishes on the exam and let us know how it goes!

 

Thanks, Michelle

I am an HP Employee
http://www.hp.com/go/expertone
VijayReddy123
Advisor

Load Runner certification exam details

Hi Team,

 

I am not able to see HP0 - M48 and M49 certification is not available in Pearson VUE site to book exam.

 

Are certifications are changed?

 

HP0 - M108 is this new one or not?

 

Thanks,

Vijay...

karlkovacs
HPE Pro

Re: Load Runner certification exam details

HP AIS - LoadRunner v11 has been replaced by HP ATP - LoadRunner v12.

The required exam is HP0-M103.

 

HP0-M48 and HP0-M49 are no longer available as the certification HP AIS - LoadRunner v11 has been retired.

 


Thank you,

Karl Kovacs
VijayReddy123
Advisor

Re: Load Runner certification exam details

Thanks for your help and valuble information....

VijayReddy123
Advisor

Re: Load Runner certification exam details

Hi Team,

 

Do i need to write any pre exams before HP0-M103 certification exam?

 

Thanks,

Vijay...

karlkovacs
HPE Pro

Re: Load Runner certification exam details

No.

There are no prerequisite exams for the HP ATP - LoadRunner v12 certification.


Thank you,

Karl Kovacs
VijayReddy123
Advisor

Re: Load Runner certification exam details

Thanks for your reply,

 

Can you please give me some guildelines are topics related certification exam to clear the exam?

 

Thanks,

VIjay...

karlkovacs
HPE Pro

HP ATP - Load Runner v12 certification exam details

Exam description

This exam tests your skills on automating load and performance tests with HP LoadRunner 12.x Software.
The exam verifies that you can identify and describe how to plan load tests, create, enhance and debug web Vusers, create and run load scenarios to emulate real user behavior and analyze run results with HP LoadRunner.

 

Who should take this exam?

This exam is intended for Performance Engineers and Subject Matter Experts responsible for automating load tests with HP LoadRunner 12.x Software and for Quality Assurance Engineers who assume lead roles in the use of LoadRunner.
It is assumed that they will work implementing performance validation in QA teams under the supervision of a senior consultant.
It is recommended that candidates have six months of field experience with HP LoadRunner 12.x.
 

Exam contents

This exam has 75 questions. Here are types of questions to expect:

  • Matching
  • Multiple choice (multiple responses)
  • Multiple choice (single response)
  • Pull down menu selection

Tips for taking this exam

It is highly recommended that any candidate preparing for the exam has hands on experience.  You are expected to have experience using and implementing the software in the real world.
Review exam topics, goals, themes and related weights in the Objectives section below and identify what you still need to learn.
Examine the various topics in the supporting training outline and identify the larger themes and key information developed within it.
Assess whether your experience in the field is enough to take and pass the exam or if alternatively, based on identified gaps, you would benefit from attending the recommended training.
Use solution tutorials (if any) to assess your knowledge and preparation status.
Review main concepts and tasks in the key product documentation.
We strongly advise to go over the exam topics in the self study material referenced below.

 

Exam ID HP0-M103 Exam type Proctored exam taken at dedicated testing center Exam duration 2 hours Exam length 75 questions Passing score 60% Delivery languages English Related Certifications

Supporting courses These recommended courses help you prepare for the exam:

 

Additional study materials

Register for this Exam

You will need an HP Learner ID and a Pearson VUE login and password.

 

No online or hard copy reference material will be allowed at the testing site. This exam may contain beta test items for experimental purposes. During the exam, you can make specific comments about the items (i.e. accuracy, appropriateness to audience, etc.). HP welcomes these comments as part of our continuous improvement process.

 

Objectives

This exam validates that you can successfully perform the following:
  Sections/Objectives 12%

Performance validation with HP Loadrunner

  • Identify and describe performance testing principles
  • Identify and describe the advantages of LR as a performance testing tool
  • Identify system requirements and supported environments
  • Identify and describe the LR installation process and components
  • Identify and describe HP Loadrunner integrations and extensions (NV, Diagnostic, Mobile, other HP and non-HP tools, Cloud…)
  • Identify and describe how to plan for a load test

 

10%

Virtual User and Virtual User Generator base concepts

  • Identify and describe the Virtual User Generator base concepts, technologies and purpose
  • Demonstrate familiarity with the VuGen User Interface
  • Recognize, identify, and describe Vuser types, protocols and protocol bundles
  • Identify and describe how to use the protocol advisor
  • Identify and explain VuGen settings and default configuration
  • Delineate the process of developing a Vuser script

 

24%

Creating Vuser Scripts

  • Identify and describe how to record a Vuser Script
  • Identify and describe how to enhance a Vuser Script
  • Identify and describe how to replay a Vuser Script
  • Identify and describe how to troubleshoot replay problems in a Vuser Script
  • Identify and describe advanced scripting techniques and statements
  • Identify and describe how to prepare a Vuser Script for Load Testing

 

8%

LR Controller base concepts

  • Identify and describe the LR Controller base concepts, technologies and purpose
  • Demonstrate familiarity with the LR Controller Interface
  • Recognize, identify, and describe scenario types
  • Identify and explain LR settings and default configuration
  • Delineate the process of executing a LR scenario

 

11%

Creating a scenario

  • Identify and describe how to create a scenario
  • Identify and describe how to modify script details
  • Identify and describe how to create load on a system
  • Identify and describe how to emulate real load behaviour
  • Identify and describe how to emulate different types of users
  • Identify and describe how to monitor the system under load

 

11%

Executing a scenario

  • Identify and describe how to run a load test scenario
  • Identify and describe how to watch a scenario
  • Identify and describe how to modify a load scenario during the test
  • Identify and describe how to discern application errors and performance issues during the test
  • Identify and describe how to collate load test results

 

7%

LR Analysis

  • Identify and describe the LR Analysis base concepts, technologies and purpose
  • Demonstrate familiarity with the LR Analysis Interface
  • Delineate the process of analysing load test results

 

17%

Analyzing a scenario run

  • Identify and describe how to create an analysis session
  • Identify and describe information gathered about a scenario run
  • Identify and describe how to view a summary of performance
  • Identify and describe how to graphically view performance
  • Identify and describe how to compare performance to SLA
  • Identify and describe how to analyze application and system performance
  • Identify and describe how to create reports

Thank you,

Karl Kovacs