NBX
Showing results for 
Search instead for 
Do you mean 

4 Digit Dialing “No IP Resources”

Occasional Advisor

4 Digit Dialing “No IP Resources”

I have 3 NBX Systems. 1 at a home office, and 1 at each of my 2 branch offices, both of which have a direct connection to the home office. All running R6.0.14

 

I can 4 digit dial to and from  branch A to the home office with no problems.

 

Office B is a different story. 4 Digit dialing from Home office to Branch B works, but it instantly goes to the users voicemail. And the "straight to voicemail" button is NOT on..

 

4 digit dialing FROM the branch B, TO the home office gives a "no IP resources" error on the phone.

 

I should note that the second office is a new addition that has just been set up for the first time. so this isnt a case of something that was working before and recently broke. Any ideas?

 

I looked in the dial plan of the main site and found entries for Branch A, and just made an addtl entry for office B, just changing the 2 digit extension prefix and the IP to the NBX, plus a couple of other minor changes, and that gave me the ability to dial, but as i said before, it goes straight to voicemail.

 

I looked in the dial plan for both remote sites and made similar changes in Branch B using the working NBX as a reference, but that got me nowhere. What should i be looking for here? When i run the "QUERY REMOTE" in Virtual Connections>Virtual Tie Lines between Home office and Branch B it is successful both ways.

 

I am certainly willing to post up any logs, just let me know. Thanks in advance!

 

 

 

 

1 REPLY
Occasional Advisor

Re: 4 Digit Dialing “No IP Resources”

Solved it folks. Here is the article that helped me.

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02601851

 

I already had the license, and IP protocol set to "IP on the Fly". The only thing i had to do was go to System Wide Settings> IP settings> IP address Ranges> and add an IP range (14 Ip addresses is what i included in my range) and saved it. didnt even have to reboot. it worked both to and from both buildings. Hope this helps someone else.