How to enter BIOS on NetServer LH II ?

[Bengt Samuelsson]

Hi,

I have that simple qurstion!
How to enter BIOS setup on NetServer LH II ?

[Sean T. Craig · Accepted solution]

Hi Bengt,

Going into the BIOS on this server is a little different than you're probably used to. You need to boot to the EISA Configuration Utility Diskette (ECU). Usually, there's a diskette in an ESD sleeve inside the server. If you don't have one, you can download it here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=50440&prodNameId=15473&swEnvOID=54&swLang=13&mode=2&taskId=135&swItem=ns919en

Good luck,

Sean T. Craig Sr. C.E.T., M.C.P.

[Bengt Samuelsson]

Thanks! It worked just fine that way too!