NetRAID.Log -- Adapter 0: Battery Voltage LOW

[Jan Shu]

The following NetRAID.log warning is in the eventview log every 5-7 min. I checked the UPS attached to the HP NetServer, which is fine. Is this a hardware problem? Or I should clear this log? Where is the log?
Thank you for your help in advance.
**********************************
Event Type: Warning
Event Source: NetRAID.Log
Event Category: None
Event ID: 5202
Date: 10/13/2004
Time: 4:11:59 PM
User: N/A
Computer: USPAESSAPP001
Description:
Adapter 0: Battery Voltage LOW.
*****************************************
Event Type: Information
Event Source: NetRAID.Log
Event Category: None
Event ID: 5102
Date: 10/13/2004
Time: 4:12:10 PM
User: N/A
Computer: USPAESSAPP001
Description:
Adapter 0: Battery Voltage GOOD.
***************************************

Regards,
Jan Shu

[Greg Carlson · Accepted solution]

Jan,

What netserver do you have and which netraid card do you have? Its possible that it could be firmware related. Or you may need to reset the charge cycles in ctrl-M (can't perform from netraid Assist), boot into ctrl-M, objects, adapter and battery and reset the charge cycles, if you ar at a high number in the thousands, then it reached the threshold. I would start there first.

hth,
Greg

[e4services]

The NetRAID controller has the battery backup on board, I am guessing, and it needs to be renewed