1748259 Members
3702 Online
108760 Solutions
New Discussion юеВ

Re: heat load data?

 
SOLVED
Go to solution
Bill Robertson_1
Occasional Contributor

heat load data?

Is there heat load data for the lt6000r series.
It's not on the spec sheet.
Thanks
5 REPLIES 5
Bill McNAMARA_1
Honored Contributor

Re: heat load data?

You can find it here:
http://netserver.hp.com/products/info.asp?pid=lt6000r&sheet=specs&pid2=lt+6000r

operating temperature (non-metric) 41 to 95 degrees F

operating temperature (metric) 5 to 35 degrees C

operating humidity 20% to 80% noncondensing


Later,
Bill
It works for me (tm)
Bill Robertson_1
Occasional Contributor

Re: heat load data?

The specifications give it's environmental parameters.
I'm looking for the btu heat generation data.
For the LT6000r there is not a site prep guide.
The installation manual has an entry that says BTU data not available. I was hoping that it was now.

Thanks.
Denver Osborn
Honored Contributor

Re: heat load data?

I've looked around for this information and haven't found it either.

Sales might have an idea.
1-800-752-0900, choose option 2 then 3 to speak to a sales rep.
Edward Winter
Occasional Advisor
Solution

Re: heat load data?

If you download Rack Assistant from http://netserver.hp.com/tools/ you can get the physical dimensions, weight, power requirements and BTU ratings for all hp NetServers.
Bill Robertson_1
Occasional Contributor

Re: heat load data?

Thanks, I was able to get the BTU data for a configured rack. Rather round-about.
I had actually tried to download Rack assistant a few times before, but wasn't able to.