StoreEasy Storage
1748224 Members
4591 Online
108759 Solutions
New Discussion

Re: Getting started with ILO....?

 
akselc
Occasional Visitor

Getting started with ILO....?

Hello

Confused!

I have a HP StoreEasy 1040 Storage server, OS is Windows Stroage server 2012 standard.

My end goal is to access the server from outside via ILO/Console, in case OS crashes or something.

As now, i have only HP System management. have updated firmware on ILO to latest, configured HP Lights-Out Online Configuration utility (Set IP address on ILO) and connected ILO to a public IP address.

What steps do i need to do now? I tried typing ILO address in a local browser, but "The page could not be displayed"

What else do i need.

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: Getting started with ILO....?

According to the quickspec

 

http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111444.pdf

 

you have a dedicated ILO port, did you connect a cable there?

Or did you configure ILO for shared port?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!