service release on 1200s

[Ton Bettonvil]

how can i check which service release my 1200s runs, winver shows Microsoft Windows version 5.2 (build 3790.srv03_gdr.040410-1234)

thanks

[Keith_112]

Two ways:

1) HP NAS WebUI, Status tab, System Information tab, look at WebUI version (if version is 5.3, you have NAS SR3 installed)

2) Using Windows Explorer, c drive, open hpnas folder. If there is a SR installed, you should see a folder SR1 or SR2 or SR3.

[Ton Bettonvil]

Keith, the WebUI has a line: Storage Works NAS WebUI, is says v3.1.1
I cannot find any folders starting with SR under the hpnas folder on C
does this mean ne SR is installed?

[Keith_112]

Ton,

Sorry, v. 3.1.1 is the base version without any NAS Service Releases installed.

To obtain the latest NAS Service Release (cost and shippage is free), go to: http://software.hp.com

Click on the Storage and NAS link under Product category. At the bottom is the latest NAS Service Release.

[Ton Bettonvil]

Thanks Keith, just ordered the cdrom.
Another question, i just upgraded my 1200S from 512mb to 1gb ram by taking out the 512 and replacing it with a 1gb dimm, can i add the 512mb dimm as well or is a mix of the two not allowed.

[Keith_112]

I will not say having the additional 512MB cannot be done, but you will have your 1200s in a non-standard and untested configuration.