Network Management / (OpenView-NNM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

Deduplication is not working

SOLVED
Go to Solution
Highlighted
Honored Contributor

Deduplication is not working

Hello All

 

I had setup de-duplication with

 

count                                                             :                              11

minutes                                                        :                               2

correlation incident                                   :                               DuplicateCorrelation

 

and I am receiving 12 alarms.

 

NNM console displays all 12 alarms and afte some time NNM console shows DuplicateCorrelation incident, but does not clean the duplicate alarms ( 11 in count )

 

Am I doing the correct way to clear the duplicates from NNM console view.

 

Please help.

1 ACCEPTED SOLUTIONS
Honored Contributor

Re: Deduplication is not working

Thanks Dave

 

This thread would be closed.

2 REPLIES
HPE Expert

Re: Deduplication is not working

Ramesh,

 

  We are alreadly talking in another thread about this same feature and there you have indicated it is working as I explained, so I assume we can close out this thread for now.

 

  All the best

 

Dave Y

HP Support
Viewed the Support tips? Search for "(NNMi) Support Tips" and order by Date to get the list
The views expressed in my contributions are my own and do not necessarily reflect the views and strategy of HP
If you find this or any post resolves your issue, please be sure to mark it as an accepted solution.
Honored Contributor

Re: Deduplication is not working

Thanks Dave

 

This thread would be closed.