Network Management / (OpenView-NNM) Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

HP / DELL iLO Trap based monitoring

Valued Contributor

HP / DELL iLO Trap based monitoring

Hi All,

 

I am in need to monitor HP / Dell

Dell PowerEdge R620

HP DL 380 G7

 

iLO monitoring through SNMP TRAP to NNM Station. How can i do that ? and what are the MIB's i needed to be updated to get this done ? Please advise.

 

  • I have uploaded the following mib for dell system except ITassist as it showing pharsing error. and then tested with "Test Alert" in Dell iLO, but the NNM have not received any alerts. following mib s were uploaded.

10892.mib 
adptinfo.mib 
baspCfg.mib  
baspStat.mib 
baspTrap.mib 
DcAsfSrv.mib
dcs3rmt.mib 
dcs3fru.mib
dcstorag.mib
dellcm.mib
INTELLAN.mib
ITassist.mib
rac_host.mib 

 

Regards,

BeB

3 REPLIES
Honored Contributor

Re: HP / DELL iLO Trap based monitoring

But have you added the ILO originating address into the inventory ? It doesnt have a full SNMP agent so it'll be an IP only node, but NNMI out of the box will ignore traps from any non-inventory node or component thats not monitored.

Have a nice day :)

Andy Kemp,  CISSP
Valued Contributor

Re: HP / DELL iLO Trap based monitoring

Spoiler
Hi AndyKemp,

 

    Yes, i haved added those IP addresses in nodegroup and then into monitoring. I have uploaded the mib's except few.

 

and tested from iLO for a send test alert. Still didnt receving any traps. :( am not sure what to do ?

 

Regards,

BeB

Highlighted
Respected Contributor

Re: HP / DELL iLO Trap based monitoring

Hello beb , 

 

can you use trapdump command to check if you are getting any traps in TrapDB ,

 

for using this command . 

 

nnmtrapdump.ovpl -u system -p mypassword -source XXXX > /tmp/trapdump.txt

 

#nnmtrapdump.ovpl -u system -p mypassword > /tmp/Maytrap.txt

 

for realtime traps use nnmtrapdump.ovpl -t

All the best .
Regards
Mostafa Hassan
HP AIS NNM-NA-OO
CCNA-CCNP-ITIL-VCA-Cloud-VCA DataCenter