Network Management / (OpenView-NNM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

How to get interfce polling details

Valued Contributor Valued Contributor

How to get interfce polling details

Hi,

 

Can we get the interface name of particular device which are being polled by NNM using a command.

Regards,
Sridhara.
2 REPLIES
Honored Contributor

Re: How to get interfce polling details

Theres no way to list by command line interfaces being polled by a policy.

Have a nice day :)

Andy Kemp,  CISSP
Highlighted
Honored Contributor

Re: How to get interfce polling details

You can run following 2 commands to get interface name of a particular interface.

 

nnmtopodump.ovpl -type ip -filter ip.value=<ip-address> /* ip-address is IP address of interface */

 

This would list the topology values of the interface, from the output look for following line,

 

<interface>xxxxxxxxxxxxxxxx</interface>

 

Extract the value contained in this line and then run the 2nd command,

 

nnmtopodump.ovpl -type interface -filter interface.id=xxxxxxxxxxxxxxxx

 

This will list ifName, ifAlias, ifType and other details of the Interface.