Network Management / (OpenView-NNM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

Ip capacity monitoring

Frequent Advisor

Ip capacity monitoring

Hi all, is there a way we can monitor ip capacity through nnmi. By ip capacity I mean the ip addressees left in a network. I didn't find any preloaded mib on nnmi server. Please help
2 REPLIES
Highlighted
Honored Contributor

Re: Ip capacity monitoring

I don't think you're going to find a magic bullet here.

 

Does NNMi monitor every single IP in your network? Probably not, right? So how would it be able to tell which IP addresses are in use?

 

If you're looking to monitor DHCP scope usage, then you're better off monitoring your DHCP server. 

 

If you're looking at usage of static IP addresses, then you're probably better off using a proper IP address management tool - it should give you all of this data.

 

CCIE 36708 | @northlandboy | lkhill.com
Frequent Advisor

Re: Ip capacity monitoring

Thanks northland boy for the answe