Network Management / (OpenView-NNM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

SNMP Agent Not responding on Node

Highlighted
Frequent Advisor

SNMP Agent Not responding on Node

Dear Expert,

 

We have receviced the minor alert ie. SNMP Agent Not responding  on node

 

On that node Interface status is unknown

And alse we have checked the snmpwalk the output is

 

C:\Users\hpoveuser>nnmsnmpwalk.ovpl CDB_RACK3_SANSW
No response from CDB_RACK3_SANSW, verify credentials.

 

 

Thanks in advance

E.Nithyaraj.

 

Thanks& Regards
E.Nithyaraj.
If you can dream it, you can do it......
3 REPLIES
Regular Advisor

Re: SNMP Agent Not responding on Node

hello Nithyaraj,

 

nnmsnmpwalk.ovpl -c <community string> CDB_RACK3_SANSW

 

community string you can check in the snmp settings of the node CDB_RACK3_SANSW.

 

also make sure the nnm servers are in the mentioend in the acl

Frequent Advisor

Re: SNMP Agent Not responding on Node

Hi Expert,

 

 

I have  checked  with nnmsnmpwalk -c community string  CDB_RACK4_SANSW

 

Even i geting same output only....

 

 

 

Thanks & Regards

E.Nithyaraj

 

 

Thanks& Regards
E.Nithyaraj.
If you can dream it, you can do it......
Frequent Advisor

Re: SNMP Agent Not responding on Node

[ Edited ]

Hi,

 

it is SNMP issue at Node end, Check community string and destination IP at Node end(SNMP Setting)..

If device have SNMP Version 3 Capability,Also verify credentials

 

Swarnm......................................................
..................always say 'YES' with heart...!!!