Network Management / (OpenView-NNM) Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

cisco mibs

SOLVED
Go to Solution
Valued Contributor Valued Contributor

cisco mibs

Hi,
we have NNM6.20 running on Win2000. Yesterday I tried to load some cisco mibs but always got this error message:
Error detected while loading mib file:...
This mib cannot be loaded until the following problem is corrected: Error defining object 'ciscoC2900MIB':Parent 'ciscoMgmt' not defined. Load the mib that defines 'ciscoMgmt' before loading this MIB.
Does anybody know which MIB defines ciscoMgmt?
I looked at the cisco pages, there are a lot of mibs but I could not find a MIB which defines 'ciscoMgmt'.
Any help would be highly appreciated.

Werner Siewert
1 ACCEPTED SOLUTION
Highlighted
Occasional Advisor

Re: cisco mibs

I had the same problem.
Load the CISCO-SMI.my, then load the other cisco mib.
That's it.

/Pierre Bjarnfelt
3 REPLIES
Highlighted
Occasional Advisor

Re: cisco mibs

I had the same problem.
Load the CISCO-SMI.my, then load the other cisco mib.
That's it.

/Pierre Bjarnfelt
Valued Contributor Valued Contributor

Re: cisco mibs

it works. Thank you, Pierre.
But I still have Problems loading RMON2-MIB.my and HC-RMON-MIB.my. There is a MIB needed defining TokenRing...
Do you also know this MIB???

Werner Siewert
Occasional Advisor

Re: cisco mibs

Hi.
Try the TOKEN-RING-RMON.my It worked for me.

/Pierre