Network Management / (OpenView-NNM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

snmp v3 in 9.1

SOLVED
Go to Solution
Highlighted
Advisor

snmp v3 in 9.1

hi

I have  a wierd problem  i try to discaver    with snmp v3  and i  get   the  massge :

 

nnmsnmpwalk.ovpl -u uuuuu -p zzzzzz -port 161  -v 3 -v3u NNM  -x
DES -X zzzzzzNNM  -a MD5 -A zzzzzzzzzz   aaa.aaa.a.aaa
17/10/2013 14:38:18 com.hp.ov.snmp.stages.ResponseStageEventHandler createRespon
seFromMessage
WARNING: SNMPv3 agent /aaa.aaa.a.aaa:161 ignoring request id and returning 0 in
the response

 

but if i send a trap in snmp v3 form aaa.aaa.aaa i   resive it

 

what to do

 

pls  help

 

dov

1 ACCEPTED SOLUTIONS
Frequent Advisor

Re: snmp v3 in 9.1

correct snmp configuration needs to be done on the network device. we faced similar issue and took help of Network device's vendor.

 

once correct configuration was set, snmp walk successfully started.

 

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

1 REPLIES
Frequent Advisor

Re: snmp v3 in 9.1

correct snmp configuration needs to be done on the network device. we faced similar issue and took help of Network device's vendor.

 

once correct configuration was set, snmp walk successfully started.

 

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.