Network Management
Showing results for 
Search instead for 
Do you mean 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Network Management
Posted to:
Original author:
HI I'm trying to install HP IMC+MySQL ver 5.7 and get error Checking Database Parameter Configuration... Not Passed The following database parameters do not meet the installation requirements. Please modify the configuration according to the iMC MySQ...
Posted to:
Original author:
Hi everybody, I have the version 7.0 of IMC and I love this soft but I have a problem that is more and more boring... I have 120 switchs and routers directly mamanged by IMC. It work fines but everyday I have a lot (like 50/60 times) of "Device...
Posted to:
Original author:
Hi All, im looking for Blade center c7000 6125G switch mibs. I need to load only the 6125G mibs into a 3rd party network management system. The only MIBS i can find contain 256Mb of mibs (MIBs_V7-6125G.zip) for every switch and probably more. Is ther...
Posted to:
Original author:
Hi, I am trying to load and compile a MIB for Alcatel 6900 switches. It fails with the error:- [INFO]Begin to compile mib files>>>>>>>>>>>>>>>> [ERROR]The file(ALCATEL-IND1-BASE.mib) is an invalid MIB f...
Posted to:
Original author:
Hello! I would like to know if theres anyway for us to determine when exactly a switch was plugged into our network. One way I I'm using is looking at the Unreachability history, since it starts at the point we presume the switch was pluged into IMC,...
Posted to:
Original author:
Good afternoon everyone, Let me explain my configuration : MSchapV2 for the authentication, EAP-PEAP. So i want to authenticate users in a domain(or not for test purpose). I put IMC on the DC windows ( there is no more specifications on IMC UAM E0403...
Posted to:
Original author:
Hello Markus, you might try the following: go to the Report | Report Template List and select the "Interface Connectivity Summary Report". There you select a time frame (i.e. 90 days). In the report you will find the coloum "Total Brea...
Posted to:
Original author:
Neil, The ability is there, it's not just built in yet. It's possible via RFC 4675 which was actually drafted by a couple of HP technologist. To configure it in IMC: User-->User Access Policy-->Access Device Management-->Access Device Type S...
Posted to:
Original author:
You're getting SNMP traps from devices that aren't managed by IMC. With that volume, the most likely source is from some system that has SNMP Authentication Failure traps enabled, and IMC set as its destination. You've got three choices: 1/ Fix the o...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot ThreadHot Thread
  • Replied-to Thread Replied-to Thread
  • Read Only ThreadRead Only Thread
Events
January 2016
Online
Software Expert Days - 2016
Join us online to talk directly with our Software experts during the online Expert Days - see details below. Software experts do not monitor this foru...
Read more
Ongoing
See board event postings
Vivit Events - 2016
Learn about upcoming Vivit webinars and live events in 2016.
Read more
View all
What's New
Top Authors
Honored Contributor
111
Occasional Contributor
1
Valued Contributor
5
View all