1745783 Members
3626 Online
108722 Solutions
New Discussion юеВ

Reset LOM on bl870ci2

 
marvin51796
Regular Advisor

Reset LOM on bl870ci2

Is there a way to reset LOM's on the main board on a bl870ci2??

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Reset LOM on bl870ci2

Regarding your other thread - power cycle the blade (the server).

 

But I doubt this will change anything.

 

Check the firmware of the LOMs.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
marvin51796
Regular Advisor

Re: Reset LOM on bl870ci2

We/hp have done alot of that, including pulling the blade, resetting the blade in the chassis, updating all firmware..etc etc for a week now..and nothing has helped...i think we are having that blade replace later today....

thanks

 

Torsten.
Acclaimed Contributor

Re: Reset LOM on bl870ci2

OK, you replaced blade 1 and now LOM on blade 2 is not working?

 

Strange.

 

However, if you want to check LOM firmware do

 

# nwmgr -q vpd -c lan0

 

for the lan_X devices.

 

Are all the same?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!