Networking
Showing results for 
Search instead for 
Do you mean 

Server cannnot connect after IP addrress change

SOLVED
Go to Solution
Highlighted
Occasional Advisor

Server cannnot connect after IP addrress change

I have an old rx2620 with OpenVMS V8.4.

In order to test some software i have to create a VPN with another site. Both sites have same network 192.168.1.0, so I had to change my local network.

I tried to change via @TCPIP$CONFIGURE, core, interface but it crashes. So I changed via TCPIP command (set conf interface, etc).

Now server is isolated.

 

Details:

Old IP address (WE0) = 192.168.1.13  New IP Address 192.168.13.62

Old IP address (IE0) = 192.168.1.134 New IP Address 192.168.13.61

 

I cannot set route

TCPIP SET ROUTE 192.168.13.0 /GATEW=192.168.13.1

%TCPIP-E-ROUTEERROR, error accessing routes database (TCPIP$ROUTE)
-SYSTEM-F-UNREACHABLE, remote node is not currently reachable

 

Ping to ateway does not work

PING 192.168.13.1

ping: sendto: no route to host
ping: wrote GW 64 chars, ret=-1


How can I resolve?

 

TIA

 

 

Antonio M. Vigliotti

 

 

Antonio M. Vigliotti
1 ACCEPTED SOLUTIONS
Honored Contributor

Re: Server cannnot connect after IP addrress change

[ Edited ]

Antonio,

 

> 192.168.13.1    GW, gw

 

You might want to change this to 193.168.13.1 !

 

Or you've got your local IP adresses wrong ?

 

Volker.

6 REPLIES
Honored Contributor

Re: Server cannnot connect after IP addrress change

Antonio,

 

could you please post the output of

 

$ TCPIP SHOW INT

$ TCPIP SHOW ROUTE

 

Volker.

 

Occasional Advisor

Re: Server cannnot connect after IP addrress change

$ tcpip sh int
                                                           Packets
Interface   IP_Addr         Network mask          Receive          Send     MTU

 IE0        193.168.13.61   255.255.255.0            6296             1    1500
 LO0        127.0.0.1       255.0.0.0                   9             9    4096
 WE0        193.168.13.62   255.255.255.0            6297             1    1500

 

$ tcpip sh route

                             DYNAMIC

Type           Destination                           Gateway

AH    127.0.0.1                             127.0.0.1
AN    193.168.13.0/24                       193.168.13.62
AN    193.168.13.0/24                       193.168.13.61
AH    193.168.13.61                         193.168.13.61
AH    193.168.13.62                         193.168.13.62

 

 

Antonio M. Vigliotti
Honored Contributor

Re: Server cannnot connect after IP addrress change

Antonio,

 

shouldn't there be a default route entry ?

 

$ TCPIP SET ROUTE/DEFAULT/GATE=193.168.13.1 [/PERMANENT]

 

assuming 193.168.13.1 is your router/gateway address for this network ?

 

Volker.

Occasional Advisor

Re: Server cannnot connect after IP addrress change

This happens when I try to set a route

 

$ tcpip

set rout 192.168.13.0 /gateway=GW
%TCPIP-E-ROUTEERROR, error accessing routes database (TCPIP$ROUTE)
-SYSTEM-F-UNREACHABLE, remote node is not currently reachable
TCPIP> set route /gateway=GW/def
%TCPIP-E-ROUTEERROR, error accessing routes database (TCPIP$ROUTE)
-SYSTEM-F-UNREACHABLE, remote node is not currently reachable
TCPIP>

(note GW is the same of 192.168.13.1)

 

TCPIP> sh host gw

     LOCAL database

Host address    Host name

192.168.13.1    GW, gw

Antonio M. Vigliotti
Honored Contributor

Re: Server cannnot connect after IP addrress change

[ Edited ]

Antonio,

 

> 192.168.13.1    GW, gw

 

You might want to change this to 193.168.13.1 !

 

Or you've got your local IP adresses wrong ?

 

Volker.

Occasional Advisor

Re: Server cannnot connect after IP addrress change

Right network is 192.168.13.0

I wrong wrote when inserted host names i64shs and iiashs, so address network and gateway does not match.

 

Tank you Volker

 

Antonio M. Vigliotti