Server cannnot connect after IP addrress change

[AntonioMariaV]

I have an old rx2620 with OpenVMS V8.4.

In order to test some software i have to create a VPN with another site. Both sites have same network 192.168.1.0, so I had to change my local network.

I tried to change via @TCPIP$CONFIGURE, core, interface but it crashes. So I changed via TCPIP command (set conf interface, etc).

Now server is isolated.

Details:

Old IP address (WE0) = 192.168.1.13  New IP Address 192.168.13.62

Old IP address (IE0) = 192.168.1.134 New IP Address 192.168.13.61

I cannot set route

TCPIP SET ROUTE 192.168.13.0 /GATEW=192.168.13.1

%TCPIP-E-ROUTEERROR, error accessing routes database (TCPIP$ROUTE)
-SYSTEM-F-UNREACHABLE, remote node is not currently reachable

Ping to ateway does not work

PING 192.168.13.1

ping: sendto: no route to host
ping: wrote GW 64 chars, ret=-1

How can I resolve?

TIA

Antonio M. Vigliotti

[Volker Halle]

Antonio,

could you please post the output of

$ TCPIP SHOW INT

$ TCPIP SHOW ROUTE

Volker.

[AntonioMariaV]

$ tcpip sh int
                                                           Packets
Interface   IP_Addr         Network mask          Receive          Send     MTU

 IE0        193.168.13.61   255.255.255.0            6296             1    1500
 LO0        127.0.0.1       255.0.0.0                   9             9    4096
 WE0        193.168.13.62   255.255.255.0            6297             1    1500

$ tcpip sh route

                             DYNAMIC

Type           Destination                           Gateway

AH    127.0.0.1                             127.0.0.1
AN    193.168.13.0/24                       193.168.13.62
AN    193.168.13.0/24                       193.168.13.61
AH    193.168.13.61                         193.168.13.61
AH    193.168.13.62                         193.168.13.62

[Volker Halle]

Antonio,

shouldn't there be a default route entry ?

$ TCPIP SET ROUTE/DEFAULT/GATE=193.168.13.1 [/PERMANENT]

assuming 193.168.13.1 is your router/gateway address for this network ?

Volker.

[AntonioMariaV]

This happens when I try to set a route

$ tcpip

set rout 192.168.13.0 /gateway=GW
%TCPIP-E-ROUTEERROR, error accessing routes database (TCPIP$ROUTE)
-SYSTEM-F-UNREACHABLE, remote node is not currently reachable
TCPIP> set route /gateway=GW/def
%TCPIP-E-ROUTEERROR, error accessing routes database (TCPIP$ROUTE)
-SYSTEM-F-UNREACHABLE, remote node is not currently reachable
TCPIP>

(note GW is the same of 192.168.13.1)

TCPIP> sh host gw

     LOCAL database

Host address    Host name

192.168.13.1    GW, gw

[Volker Halle · Accepted solution]

Antonio,

> 192.168.13.1    GW, gw

You might want to change this to 193.168.13.1 !

Or you've got your local IP adresses wrong ?

Volker.

[AntonioMariaV]

Right network is 192.168.13.0

I wrong wrote when inserted host names i64shs and iiashs, so address network and gateway does not match.

Tank you Volker