OV Performance Management Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

HP OVPI 5.41 Interface utilization reports

SOLVED
Go to Solution
Super Advisor

HP OVPI 5.41 Interface utilization reports

Hi All,

 

I just wonder what is the unit of data that OVPI shows in Near Real TIme Interface Utilization report...

 

for example: "Avg In", "Avg Out" 

 

below is the example of data from report generated in CSV format:

 

Table Key Avg In Utilization (F) Avg Out Utilization (F) Avg Utilization (H) UtilThreshold Serial0/1/0 0.36 0.62   90 Serial0/1/0 0.41 0.43   90

 

Can anyone help me to identify

 

1)Unit of data

2)meaning of (F)

3) why is "Avg Utilization column(H)" empty.

 

Thanks a lot in advance!

 

Regards,

Hanumant D. Madane

 

 

 

3 REPLIES
Highlighted
Honored Contributor

Re: HP OVPI 5.41 Interface utilization reports

- Vidyasagar Machani -

Tell me and I forget. Teach me and I remember. Involve me and I learn. -- Benjamin Franklin
Honored Contributor

Re: HP OVPI 5.41 Interface utilization reports

why is "Avg Utilization column(H)" empty. >>

 

The interface is Full Duplex hence the values related to the Full Duplex are reflecting and empty value is showing for the Half Duplex Metric..

- Vidyasagar Machani -

Tell me and I forget. Teach me and I remember. Involve me and I learn. -- Benjamin Franklin
HPE Expert

Re: HP OVPI 5.41 Interface utilization reports

Average utilization is a percentage of the theoretical max utililization - octets/speed*time.

"F" and "H" refer to whether the interface is full or half duplex.