PC Software
Showing results for 
Search instead for 
Do you mean 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
We have our iLO 4 setup with port forwarding(Not my call, gotta work with it) and we want to access it outside our internal network. Right now, to access it, we have to use our IP plus the port to access it instead of our remote site. For example, to...
Posted to:
Original author:
Hi there Hope somebody can help with this. We use HP SIM to monitor the status of our sites / offices worldwide. We are experiencing a number of "System is unreachable" events on the HP SIM collection. However when these occurr we are able...
Posted to:
Original author:
Is there any link or doc that explains the steps for the enclosure discovery? Do you just discover the OA and make sure OA sends the snmp traps to the CMS server? First timer looking for guidance. Thx in advance, David
Posted to:
Original author:
Hi, I have two Proliant DL380 G7 with hp snmp agents (RHEL 6), and monitoring was OK. Now I added two Fiber Channel cards (HP 82Q 8Gb), then enabled cmafcad agent (was disabled), restarted snmp agents and hp system management homepage. And still see...
Posted to:
Original author:
Can anyone confirm that you can install and use SHA-2 / SHA-256 certificates on ILO 2? The CSR creation page doesn't have that option, but that doesn't prevent you from getting one from a public or internal CA and trying to install it. Thanks!
Posted to:
Original author:
Hi, ESXi servers are not linked to the Enclosure despite being correctly identified (SN, server type, etc.). I have duplicate servers, one with hostname as id and other with correct hostname. Both of them show correct serial number but HP SIM is no l...
Posted to:
Original author:
Support came back with the below commands to run on the HP VCRM server itself. It seems that HP removed some acceptable ciphers from 7.3 and that prevented the communication from earlier versions that were using communication not allowed by 7.3 C:\HP...
Posted to:
Original author:
In iLO2 v2.23 we added the "Permissions" attribute to the JAR manifest file. This should allow Java Remote console to open with JRE 1.7_51 and later Edit: I figured that I could successfully open iLO2 Java Remote Console if I disable TLS 1....
Posted to:
Original author:
I've uploaded a BETA version 2.29 to a temp FTP site. Please give it a try and let me know the results. I tested it with the latest Java 8u51 and it works fine. However, you may still get the class not found error the very first time you launch the A...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot ThreadHot Thread
  • Replied-to Thread Replied-to Thread
  • Read Only ThreadRead Only Thread
Events
January 2016
Online
Software Expert Days - 2016
Join us online to talk directly with our Software experts during the online Expert Days - see details below. Software experts do not monitor this foru...
Read more
Ongoing
See board event postings
Vivit Events - 2016
Learn about upcoming Vivit webinars and live events in 2016.
Read more
View all
Top Authors
Honored Contributor
114
Occasional Advisor
1
Honored Contributor
104
View all