Showing results for 
Search instead for 
Do you mean 

Patch verify failed

Occasional Contributor

Patch verify failed

We have installed this patch PHNE_39709 on several server's from various download and the patch has installed but when verified with the check_patches command we see that an specific fileset has failed and this is described below and the same exact file has fail on several server's identically.

Should there be an concern after recieving this message and what are possible reasons and solutions.






ERROR: Fileset "PHNE_39709.NET2-RUN,l=/,r=1.0" had file errors.

* Summary of Analysis Phase:
Verified PHCO_38048.CORE2-SHLIBS,l=/,r=1.0
Verified PHCO_38048.C-MIN,l=/,r=1.0
Verified PHCO_38048.C-MIN-64ALIB,l=/,r=1.0
Verified PHCO_38048.CORE-64SLIB,l=/,r=1.0
Verified PHCO_38048.CORE-SHLIBS,l=/,r=1.0
Verified PHCO_38048.CORE2-64SLIB,l=/,r=1.0
Verified PHCO_38048.PROG2-AUX,l=/,r=1.0
Verified PHCO_38658.CORE2-SHLIBS,l=/,r=1.0
5 REPLIES
Acclaimed Contributor Acclaimed Contributor

Re: Patch verify failed

>Should there be an concern after receiving this message and what are possible reasons and solutions.

It depends. What are the error details that swjob gives for NET2-RUN?
Valued Contributor Valued Contributor

Re: Patch verify failed

Hi,
You may need to install feautre11i patch bundle before installing this patch.

http://www11.itrc.hp.com/service/patch/releaseIndexPage.do?BC=main|


Chandra
Valued Contributor Valued Contributor

Re: Patch verify failed

Hi,

Also try after installing recent ipfilter depot froma above given link.


Chandra
Occasional Contributor

Re: Patch verify failed

ok, look at /avr/adm/sw/swagent.log found info below still no definite answer to why it failed where should I be capturing this information


Verified PHNE_39709.CORE2-KRN,l=/,r=1.0
Verified PHNE_39709.NET-PRG,l=/,r=1.0
Verified PHNE_39709.NET-RUN,l=/,r=1.0
Verified PHNE_39709.NET-RUN-64,l=/,r=1.0
Verified PHNE_39709.NET2-KRN,l=/,r=1.0
ERROR: Verify failed PHNE_39709.NET2-RUN,l=/,r=1.0
Verified PHNE_39709.NMS2-KRN,l=/,r=1.0
Verified PHNE_39709.SYS-ADMIN,l=/,r=1.0
Verified PHNE_39709.SYS2-ADMIN,l=/,r=1.0
Verified PHNE_39709.KERN-ENG-A-MAN,l=/,r=1.0
Verified PHNE_39709.NW-ENG-A-MAN,l=/,r=1.0
Verified PHNE_40215.LAN-KRN,l=/,r=1.0
Highlighted
Acclaimed Contributor Acclaimed Contributor

Re: Patch verify failed

>look at /var/adm/sw/swagent.log found info below still no definite answer to why it failed

Right. Have you looked at swverify.log and swagentd.log?

Try only the one fileset?:
swverify PHNE_39709.NET2-RUN

If you can't find any more details, time to talk to the Response Center.