Showing results for 
Search instead for 
Do you mean 

swa error question

Go to Solution
Super Advisor

swa error question

[ Edited ]

Hello All,
Here is the error i'm getting when i do swa report.Any idea - pls help.
ERROR: Failed to read:
l.gz Message: URL cannot be opened. Connection timed out (errno:238)



p.S. This thread has been moved from HP-UX > System Administration  to HP-UX > patches - HP Forums moderator

Learning ...
Acclaimed Contributor Acclaimed Contributor
Acclaimed Contributor Acclaimed Contributor
Honored Contributor Honored Contributor

Re: swa error question

The good news is the version of SWA available at (C.02.11) includes a fix for this problem.

The bad news is that 1/2 of the ITRC catalog servers still do not have the proper certificates set up as we enter an extended HP holiday. This may cause some (50% oddly enough) catalog failures until we fix the server.

Two options when a problem is encountered with the new version.

1. Count to 10 and try again (really)

2. Explicitly bypass the load balancer

This should be considered a temporary fix as the balancer hides these systems for a reason, but the certificates will work with SWA C.02.11 with the addition of the option:

-x catalog_source=

Now to make some phone calls about those certs...
Honored Contributor Honored Contributor

Re: swa error question

I believe that the final certificate issues have been resolved. If users of the current revision (C.02.11) see any trouble be sure to let us know!