Showing results for 
Search instead for 
Do you mean 

LR 11 with IE 8.0

SOLVED
Go to Solution
Frequent Advisor

LR 11 with IE 8.0

Hi,

We installed LR 11 on one of test machine, and IE 8.0 also installed on that machine.

I am able to record a script.
But while playback, getting below errors

Warning: Extension LrXml.dll reports error -1 on call to function ExtPerThreadInitialize
Error: Vuser failed to initialize extension LrXml.dll.
Vuser Terminated.

How to resolve this problem.

Thanks
Ravi Allam
1 ACCEPTED SOLUTIONS
Respected Contributor Respected Contributor

Re: LR 11 with IE 8.0

Hi Ravi,

You don't need to do anything except getting admin rites in the system where you are facing this problem. It will be solved.

Thanks
Ajay Kumar
5 REPLIES
Respected Contributor Respected Contributor

Re: LR 11 with IE 8.0

Hi Ravi,

You don't need to do anything except getting admin rites in the system where you are facing this problem. It will be solved.

Thanks
Ajay Kumar
Frequent Advisor

Re: LR 11 with IE 8.0


I will ask Admin rights on this box.
After that run the script again.

Thanks
Ravi

Frequent Advisor

Re: LR 11 with IE 8.0

Ajay,

HP engineer gave below solution, that resolved the issue.

1. Navigate to the following location: \\dat\\protocols

1. If it is web protocol, go to QTweb.lrp

2. if it is citrix protocol , go to citrix.lrp or citrix_ica.lrp

2. Go to LRP file based on the script being used,

3. Open the relevant file in a Notepad

4. Look for: ResultsDirUI=1

5. Comment it out by adding a semicolon. For example: ;ResultsDirUI=1

6. Save the changes to the file.

7. Launch again the Vugen app, open the script and replay it.



Thanks
Ravi
Highlighted
Respected Contributor Respected Contributor

Re: LR 11 with IE 8.0

Hi Ravi,

I believe after change what HP provided you must be able to get rid of the problem you are facing without even having admin rites.

You can try both and check if both works fine then we have two solutions with us to solve this problem it will be useful to keep in mind for future.

Thanks for sharing this information.

Ajay Kumar
Frequent Advisor

Re: LR 11 with IE 8.0

Ajay,

Actually that was a test server so I first tried with HP's solution, it resolved the issue. I will take admin privileges on our actual testing box.

I have another small issue now, after replying the script, in test results nothing is displaying.I even verified below setting

Tools->General Options->Display
Generate report report during script execution.

This is happening to new script prepared with LR 11.0 with IE 8.0.
When I run existing scripts (LR 9.1) with LR 11.0 results window displaying with all steps.

What could be the issue.

Thanks
Ravi