Planning
Showing results for 
Search instead for 
Do you mean 

EVA Controller firmware version : How to confirm?

SOLVED
Go to Solution
Frequent Advisor

EVA Controller firmware version : How to confirm?

Hello,

I have a command View v6.0.2 console and can not find how to get the firmware version of the EVA6100 controller that it is managing. All I can get is the software version (CR0ECAxc3p-6110). It should say something like XCS, right?
4 REPLIES
Honored Contributor Honored Contributor

Re: EVA Controller firmware version : How to confirm?

You are running XCS 6.110 it seems. It won;t read "XCS6110" though that is the official title of the firmware.


Steven

Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Honored Contributor Honored Contributor

Re: EVA Controller firmware version : How to confirm?

"CR0ECAxc3p":

This is engineering 'techno babble'. It says where the firmware image was build (Colorado Springs), it's a Release version, the build number (0ECA) and, if I recall correctly, 'xc3p' shows what controllers the firmware is for.
.
Honored Contributor Honored Contributor

Re: EVA Controller firmware version : How to confirm?

You can also get the XCS version from the OCP on the front of the controller if you have access to them.

I do not know the key strokes off the top of my head, but...navigate to controller information and scroll throug the optins there. One of them is firmware info.


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Frequent Advisor

Re: EVA Controller firmware version : How to confirm?

Thanks to everyone!