Planning
Showing results for 
Search instead for 
Do you mean 

Powertrust II load questions

Occasional Visitor

Powertrust II load questions

If a rp2470 server has each of its power supplies connected to a different UPS, where can I verify the load each UPS is taking?

Also, where can I find a document with the expected battery life?

If there is a document with the load information that would be nice, Ive looking all over now... Thanks!
3 REPLIES
Acclaimed Contributor Acclaimed Contributor

Re: Powertrust II load questions

Something is wrong here ... your server has only 1 power supply (rp2470 aka A500).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor

Re: Powertrust II load questions

Yes sir I missplaced a 2 where it should be a 5. The box is a rp5470. Right now running with 2 power supplies. A 3rd one is on its way.
Highlighted
Acclaimed Contributor Acclaimed Contributor

Re: Powertrust II load questions

IIRC the load is shared between the installed power supplies. This system won't tell you about the load.
An indicator for the load are the LEDs on the UPS front panel. Depending on the management software, you may get more information from there.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!