Planning
Showing results for 
Search instead for 
Do you mean 

Problems trying to calculate the power needed for EVA8400

SOLVED
Go to Solution
Frequent Advisor

Problems trying to calculate the power needed for EVA8400

Hi every:
I'm need to calculate the amount of power needed by a EVA8400 with 2C27D configuration and all bays full with 450 GB FC 15k disks. I'm using Power Calculator from HP but this only allow 2C25D. What I'm doing wrong? See the attachment for more info about the problem
1 ACCEPTED SOLUTIONS
Highlighted
Honored Contributor Honored Contributor

Re: Problems trying to calculate the power needed for EVA8400

Maybe there is a bug in the calculator. Would it help if you calculate a 2C23D and a 2C25D, then add the difference between both to the 2C25D?
.
2 REPLIES
Highlighted
Honored Contributor Honored Contributor

Re: Problems trying to calculate the power needed for EVA8400

Maybe there is a bug in the calculator. Would it help if you calculate a 2C23D and a 2C25D, then add the difference between both to the 2C25D?
.
Frequent Advisor

Re: Problems trying to calculate the power needed for EVA8400

Hi again:
I'm trying to calculate the total BTU/h for a full capacity EVA8400 with 600GB FC 15k disks using EVA8400 calculator from HP (Excel Tool) REV111601 but when I configure the EVA at full capacity I get a error. I try also hP eConfigurator tool but also get a lot of errors. Can any help me with this calculation? What about calculate this BTU/h for 16 full capacity EVA8400 with the same characteristics?

Cheers and thx in advance