Planning
Showing results for 
Search instead for 
Do you mean 

Superdome boot problem

Occasional Contributor

Superdome boot problem

I have A5201/2A 2-cabinet Superdome with 12cells=48CPUs, disk array attached with 4 fibers. Cannot come to a BCH mode when give >co to gsp mode. I see many errors in VFP. I enclose SL error logs from several reboots in attachment. Please help I do not know from where to start searching and replacing!
Regards
Thanos Demetropoulos, TAHOE co., Athens, Greece
2 REPLIES

Re: Superdome boot problem

You appear to have a serious hardware failure, with what seems to be an internal communications issue between cells or I/O chassis.
Get a call logged with you local HP Response Centre
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Highlighted
Honored Contributor Honored Contributor

Re: Superdome boot problem

I guess the problem could be with Cell board 5 having issue related to crossbar chip. I guess this crossbar chip connectes to the crossbar fabric at the backend. If there is problem with this chip, it may collapse the backend crossbar fabric.

However, you need to place h/w call with HP Support to get rid of the problem.