HP ProCurve 2510G-24 (J9279A) doesn't work

[pilat322]

Hi everyone.  Switch doesn't work. On LEDs are on for a prolonged time. I try to reset default. How to fix it? 

[Richard Brodie_1]

You could try connecting a serial console, then power cycling it, see if you get any useful diagnostics. If you can't get anything out of that get onto HP: it's likely to be a warranty replacement.

[cgbullock]

We had this issue when we put some Rev A GBICs in a new switch.  Do you have any GBICs in the switch?

[pilat322 · Accepted solution]

Everythink is ok. I connected via serial console and boot second image. cli> jump 2. Thanks a lot.