HP Procurve 2920 - VLANs number

[Yobaaa]

Hello, we are bought switch hp procurve 2920 and i not found the answer to the question( http://h20565.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?sp4ts.oid=5354494 ): How much VLANs his can support when routing mode is on?

Where can I find a document containing this information?

Thanks in advance.

[freddufour]

hello 

have you trie this:

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4237540&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02449742-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

[Yobaaa]

Okay, if I assume command max-vlan 20 and configure 20 Vlans and assigned ip adresses for  each Vlan-interface, 

wakes it work inter vlan routing between them?

[Neil_Salmon]

In order to get inter-VLAN routing working requires the following:-

1. Enable routing - ip routing

2. Create VLANs and assign interfaces to the VLANs.

3. Assign ip address within the VLAN context: ip address 10.10.10.1/24 etc