Aruba & ProVision-based
1748233 Members
3442 Online
108759 Solutions
New Discussion

Re: no spanning-tree

 
SOLVED
Go to solution
Chris991
Advisor

no spanning-tree

Hello!

On my 5400zl with software version K.15.02.0005 I will delete/deactivate following entry’s
spanning-tree A21 path-cost 1000
spanning-tree A22 path-cost 2000
spanning-tree Trk1 priority 4

How is the command?

THX


3 REPLIES 3
Arimo
Respected Contributor

Re: no spanning-tree

Hi Chris

 

The way to negate any command in E-series boxes is "no" command. So:

 

no spanning-tree A21 path-cost 1000
no spanning-tree A22 path-cost 2000
no spanning-tree Trk1 priority 4

 

:)

 

BTW I'd suggest to update your software. K.15.02 isn't the best and stablest available.


HTH,

Arimo
HPE Networking Engineer
Helper
Valued Contributor
Solution

Re: no spanning-tree

Hi,

 

There are no "no" or "clear" option to revert back the port to its default config for these command-line, the only way to remove these lines from CLI is to find the correct/initial configuration value.

 

Verify default value for port without specific CLI parameters :

show spanning-tree config

 

regarding port path cost :

spanning-tree <interface> path-cost auto

 

regarding port priority :

spanning-tree Trk1 priority 8

 

Bye.

Chris991
Advisor

Re: no spanning-tree

Thanks.

I also upgrade to K_15_04_0009m and now ntp works also.