HYPER-V issue with HP DL 380 G7 Server

[Anandhan79]

Hi,

I am facing issue with HYPER-V on the DL 380 G7 Server. I have successfully installed windows 2008 R2 with SP1 Datacenter server on the DL 380 G7 hardware. There are one SAN LUN presented to this hardware (around 1 TB size).

SAN storage: HP EVA 6000

I have created virtual machine and the VM folder created under the SAN volume. I am unable to install windows 2008 R2 sp1 OS on the server. IT's giving error: 

There are different kind of error is showing each installation time, I am using ISO file.

A disk read error occurred

status :0xc000000f Info: windows failed to load because the NLS data is missing or corrupt

Blue screen also showing.

But the Virtual machine created under the host local drive volume, it's working fine. I can able to install the OS on the VM.

I don't have idea about this issue. Please let me know any one faced earlier.

[shocko]

That's odd. How many hard disks does the vm have and what type? ALso, have you vefified 100% that the LUN is intact with no errors?

[Anandhan79]

Single HDD drive and simple volume. SAN volume also simple & NTFS partition.

[shocko]

Have you run a full check on the file system on the SAN?

[Anandhan79]

Hi,

This is new storage and also formated the drive. Still we are getting same error once installing the VM.

[Dave73]

I have not worked with EVA's in a long time but,

It could possibly be a firmware upgrade is required on the VCS

Some reading here; http://h20272.www2.hp.com/Content/ConfigurationSetDetailView.aspx?Id=50734&FromCache=1

[Anandhan79]

Hi,

Thanks for updating this link. I will check tomorrow and update for the same.