RDP 6.9 SP4 pxe boot fails

[wangyi0226]

hi,I get the below error on a new installation for RDP 6.9 SP4, all that happens is the winPe pxe boot stops at the starting preboot automation and hangs there.Anyone have any ideas where this could be going wrong ?

(18632)SendUCast: transfer done FHd: 1 IPAddr: 10.10.3.180
(18632): RESET Transfer Table Slot: Previous Information
(18632) File Name: C:\Program Files\HP\RDP\Deployment Server\PXE\images\Boot\Fonts\wgl4_boot.ttf
(18632) File Hd: 1
(18632) IPAddr: 10.10.3.180
(18632) Port: 16677
(18632) Type: 2
(18632) Last Block: 65
(18632) Wrap: 0
(18632) Done: yes
(18632) File Size: 49752
(18632) UCast Sends: 0
(18632) Segment Size: 768
(18632)CloseFile: reference count = 0
(18632): HandleTFTP: action: next block IPAddr=10.10.3.180:16677
(18632)HandleTFTP: P_ACK for blk: 64 want blk: 65
(18632)PxeMtftp: SendUCast() building error - No transfer exists for this client
(18632)MySendTo completed: len = 4
(18632)PxeMtftp: SendUCast() error - No transfer exists for this client
(18640): InUseStatus: >>- MTFTP Service (1290996476) status=Not in use exit=False

Thanks