ProLiant Servers (ML,DL,SL)
1748161 Members
3790 Online
108758 Solutions
New Discussion

Re: DL380 G6 Installing second 8SFF Cage Kit

 
SOLVED
Go to solution
d3vnul
Frequent Advisor

DL380 G6 Installing second 8SFF Cage Kit

Hello,

I currently have a DL380 G6 server with 8 2,5" hard-drives installed and the dvd-rom. I'm plaing to purchase a second 8SFF Cage kit and SAS Expander card so i can plug additional hard-drives into the server.

I suppose i need to buy the following(correct me if I'm wrong):
DL380G6 8SFF Cage Kit: 516914-B21
SAS EXPANDER CARD:  468406-B21

I should say that I'm quite nebs into servers hardware and I've never made such an hardware upgrade ( install a cage kit ).
I'm hoping for someone that could give me some help/guides/indications on how to remove the dvd-rom cage and installing the second 8SFF Cage Kit.

Words,pictures,movies,pdf ... anything that can/could help me

Thank you in advance !

 

 

P.S. This thread has been moved from Servers > Planning to ProLiant Servers  - Hp Forum Moderator

4 REPLIES 4
Matti_Kurkela
Honored Contributor
Solution

Re: DL380 G6 Installing second 8SFF Cage Kit

The standard procedure for situations like this is to point your web browser to:

http://www.hp.com/go/support

Then select "Product Support & Troubleshooting", type in your model (DL380 G6) and click on Search.

After confirming your model ("HP ProLiant DL380 G6 Server series"), find "Manuals (guides, supplements, addendums, etc)" under "Resources for HP ProLiant DL380 G6 Server series". From there, you'll find all the documentation that is available for your server.

 

For this situation, the Server User Guide is the appropriate document:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01705681/c01705681.pdf

The procedure starts from page 57.

 

Alternatively, the Maintenance and Service Guide can help too:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01705597/c01705597.pdf

The chapter "Removal and replacement procedures" starts on page 25. On pages 33-34, you'll find instructions for the removal of the DVD-ROM drive and its cage. On pages 38 and 37, you'll find the procedures for installing the drive cage and the drive backplane.

 

 

MK
d3vnul
Frequent Advisor

Re: DL380 G6 Installing second 8SFF Cage Kit

Thank you a lot Matti. Exactly what i was looking for.
Erik Sørensen
Occasional Contributor

Re: DL380 G6 Installing second 8SFF Cage Kit

Hi d3vnul,

 

So how did your upgrade it work out?

 

Did you buy the 468406-B21 Expander card?

 

What type of disk did you install?

 

How does it perform?

 

Kind regards

Erik Bo

Hernan_8
New Member

Re: DL380 G6 Installing second 8SFF Cage Kit

Hola, como resolvio el problema como van conectados los cables desde la caja adicional de discos a la placa de expansion?

Muchas gracias por su ayuda.