ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Do you mean 

DL380 event log hpqilo2 errors

Highlighted
Occasional Visitor

DL380 event log hpqilo2 errors

Hi All.

I have a DL380 G6 server running Windows 2008 SP2 64Bit and have been getting some hpqilo2 errors in the event log.  All are event id 57 and the source is hpqilo2:

Maximum PwrMeter count (1) exceeded
Duplicate thermal sensor indices: 7
Duplicate thermal sensor instances: 6
Duplicate thermal sensor indices: 6
Duplicate fan instances: 2
Duplicate fan instances: 1
Insert logical container 3 failed
Duplicate container instances: 9
Insert logical container 3 failed
Maximum indicator count (1) exceeded
Failed GET SENSOR READING, sensor 10
NetFN 0x4, command 0x2D timed out

Does anyone have any idea why this is happening or what could be the problem.

Thanks
tom

7 REPLIES
Honored Contributor Honored Contributor

Re: DL380 event log hpqilo2 errors

What iLO2 firmware version and version of the hpqilo2.sys driver do you have?




__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
Occasional Visitor

Re: DL380 event log hpqilo2 errors

 

The Firmware Version is 1.78 and the hpqilo2.sys - 1.11.0

Acclaimed Contributor Acclaimed Contributor

Re: DL380 event log hpqilo2 errors

First I would update both, driver and firmware:

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3884083&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4064%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken#Driver%20-%20Lights-Out%20Management

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Honored Contributor Honored Contributor

Re: DL380 event log hpqilo2 errors

Those are 4 years old firmware and driver.

There has been a lot of fixes to Event ID 57 issues in both firmware and drivers since then.

Latest iLO2 firmware is version 2.20:
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p2023401934/v85711

The latest iLO 2 Management Controller Driver (hpqilo2.sys) is version 1.14.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-81d3c928edde4fedaec2dd12ba

You also need the latest iLO Management Interface Driver (CqpCiDrv.sys) version 1.16.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-918f25bb473049548b91bbd646



__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
Regular Advisor

Re: DL380 event log hpqilo2 errors

[ Edited ]

2.20? Interesting. Last notification I got was for 2.15 and that's the latest I still see here:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1146658&swItem=MTX-e015a8d367354897bc684c7793&prodNameId=1135772&swEnvOID=4004&swLang=8&taskId=135&mode=5

But for sure updating iLO is a good idea. Our G6's behave a lot better now than when we got them.

Occasional Visitor

Re: DL380 event log hpqilo2 errors

After updating firmware & driver I still get the error´s

 

hpilo2  -

Failed GET SENSOR READING, sensor 14

 

hpilo2 -

NetFN 0x4, command 0x2D timed out

 

Any other ideas ?

Honored Contributor Honored Contributor

Re: DL380 event log hpqilo2 errors

Is iLO2 available when this error happens? Event ID 57s occur when iLO2 is extremely busy, causing the Get Sensor commands sent by hpqilo2 to time out.

 

Are you using iLO dedicated NIC or shared NIC?

 

Also, please log into iLO2 and then replace in the browser bar the "/ie_index.htm" with "/dbug.htm". This will pull the iLO debug page.  Please send me a PM with the debug output.  




__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!