ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Do you mean 

Disabling ILO on Proliant DL380 G7 Problem

Occasional Visitor

Disabling ILO on Proliant DL380 G7 Problem

 

 

 Hi,

I am trying to disable ILO on a Proliant DL380G7 server but the Lights-Out Functionality global setting is still showing as Enable (with check mark) after clicking Apply.

Lights-out configuration utility version is 3.1.1.0

Thank you in advance

 

3 REPLIES

Re: Disabling ILO on Proliant DL380 G7 Problem

Hi,

 

When iLO RBSU is enabled, the iLO Option ROM prompts you to press F8 to start iLO RBSU. If iLO is disabled or iLO RBSU is disabled, the prompt is not displayed.


Press F8 during POST to enter iLO RBSU.
Select Settings→Configure, and then press Enter.
The Global iLO 3 Settings menu open
Select the iLO 3 ROM-Based Setup Utility option, and press the spacebar to toggle the setting to Enabled or Disabled
Press F10 to save the settings.
Select File→Exit to close iLO RBSU.


This setting enables or disables iLO RBSU. The iLO Option ROM prompts you to press F8 to start iLO RBSU, but if iLO is disabled or iLO RBSU is disabled, this prompt is not displayed.

Thanks & regards,
I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details
______________________________________________________
Was the post useful? Say thanks by clicking the white KUDOS Star!

Occasional Visitor

Re: Disabling ILO on Proliant DL380 G7 Problem

Thanks for your reply

 

I've been doing this with other HP boxes, disabling ILO using Lights-out configuration utility and it is working.

 

Does this mean that disabling ILO 3 on Proliant DL380G7 using Lights-out configuration utility under Windows is not supported?

 

 

HPE Pro

Re: Disabling ILO on Proliant DL380 G7 Problem

Not being familiar with using this tool w/Windows I don't have an answer, but I am curious as to why you got the through the trouble of disbaling iLO? If your not going to use the device,  isn't just not plugging a cable into the port enough? Is there some gain to actually disabling the device?

 

Thanks

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!