HPE Community
ProLiant Servers (ML,DL,SL)
1753819 Members
9464 Online
108805 Solutions
New Discussion юеВ

ESXi 4.1.0, 348481 cannot install on ML 330 G6

 
Jannarong Poopirom
Occasional Contributor

тАО04-04-2011 08:15 PM

тАО04-04-2011 08:15 PM

ESXi 4.1.0, 348481 cannot install on ML 330 G6

I tried to install ESXi 4.1.0 348481 on this server. It can boot up until it ask which disk to install. After that it shows

Installation operation Failed!

Unable to find the system image to install. This is due to the image not being mounted correctly or the CD-ROM not being supported.

Anyway to install ESXi on this server?
0 Kudos
Reply
2 REPLIES 2
Jannarong Poopirom
Occasional Contributor

тАО04-05-2011 03:57 AM

тАО04-05-2011 03:57 AM

Re: ESXi 4.1.0, 348481 cannot install on ML 330 G6

I tried using CD to install and remotely through iLO 2 but both has the same error.
0 Kudos
Reply
SMR
Valued Contributor

тАО04-05-2011 11:05 PM

тАО04-05-2011 11:05 PM

Re: ESXi 4.1.0, 348481 cannot install on ML 330 G6

If you're using the B110i controller, ESX and ESXi are not supported.
See here

http://h18004.www1.hp.com/products/servers/vmware/supportmatrix/hpvmware.html#note


On some standard configurations, ProLiants come with HP Smart Array B110i. If this Smart Array is installed, RAID is not supported in any version of ESX. For RAID support, please add HP Smart Array P212, P410 or P411.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.