Firmware Online Flash for QLogic Fibre Channel HBA cp019064.exe does not work

[ITPlatform]

The cp019064 installs correctly on BL465 G7 according to logfile C:\cpqsystem\hp\log\localhost\hpsum.log

The firmware on the Qlogic HBA does not get updated.

Expected firmware and BIOS versions in cp019064 according to reelase notes:

• Firmware 6.02.00
• BIOS 3.18
• Firmware and BIOS on my G7 server after "succesfull" installation of cp019064:
  
  • Firmware 5.06.05
  • BIOS 3.13

Prior to the firmware update I have installed PSP 9.10 and cp017949.exe which is a prereq.

Why is the firmware not updated?

P.S.This thread has been moved from  Servers>General to ProLiant Servers (ML,DL,SL)-HP Forums Moderator

[xmate]

Some firmware updates may require server reboot to finish the update process. Did you reboot the server?

[Ali]

Hi,

cp019064.exe has been included in SPP.

HP Service Pack for ProLiant version 2013.02.0 Contents:

http://ftp.hp.com/pub/softlib2/software1/doc/p1822529277/v85395/SPP2013.02.0-ContentsReport.pdf

You may update the system using the latest SPP

http://h18004.www1.hp.com/products/servers/management/spp/index.html

hope this helps,

how to say thanks.... click on Star Kudos!

Cheers!

Aftab

[ITPlatform]

Hi

The BIOS and firmware did not change after a reboot.

Since there are no other prereq than cp017949.exe (witch is installed) I see no need to update to a newer SPP.

Any other suggestions?

Regards

Jesper