HP DL180 G6 does not detect hard drives

[davidfriveros]

I have a DL180 G6 Server with several hard drives on its bays but only the first disk is detected. Disks are SAS 2TB  3.5 Part Number 507616 and the server has installed the P410 Smart Array controller. I have checked the BIOS and is set to RAID, still the server does not detect the drives, I realized that the server has the B110i controller as well installed so I disable this controller but still no drives are detected. Hope you can help me with this issue. Best Regards.

[PGTRI]

hi,

Are You using hp labeled drives? Please check the FW of the controller and update it, if it's not up to date.

Thanks

regards,

[b4u400]

Could be bad cache memory/controller

[Johan Guldmyr]

Perhaps inside the server the disks are only connected to the B110i controller.