ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Do you mean 

HP DL380 G8 - F10 HP Provisioning does not instal NCU Nic teaming

SOLVED
Go to Solution
Highlighted
Occasional Contributor

HP DL380 G8 - F10 HP Provisioning does not instal NCU Nic teaming

 

Hi All, I have built a few Proliant DL 380 G8's Using the iLO and my local drive mapped through the remote console.

 

Everytime i complete a build the NCU Nic teaming utility is not installed

 

I ran the firmware update prior to OS install and HP Provisioning is v1.50.

 

Have i done something wrong ?

 

I searched but cannot find the NCU teaming software, where can i download it from?  

 

 

 

1 ACCEPTED SOLUTIONS
Honored Contributor Honored Contributor

Re: HP DL380 G8 - F10 HP Provisioning does not instal NCU Nic teaming

What OS are you trying to build?

 

if it's windows 2012 or 2012 R2 HP hasn't release a NCU because the OS has builtin support for nicteaming since 2012.

 

if it's windows 2008 r2 follow the link

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5177958&sp...

 

2 REPLIES
Honored Contributor Honored Contributor

Re: HP DL380 G8 - F10 HP Provisioning does not instal NCU Nic teaming

What OS are you trying to build?

 

if it's windows 2012 or 2012 R2 HP hasn't release a NCU because the OS has builtin support for nicteaming since 2012.

 

if it's windows 2008 r2 follow the link

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5177958&sp...

 

Occasional Contributor

Re: HP DL380 G8 - F10 HP Provisioning does not instal NCU Nic teaming

[ Edited ]

Thanks Cederberg, It was for Windows 2008 R2.

I can't think why the provisioning would not install it by default though.

HP SmartStart would alway install it for Windows O/S's