HP ML150 G6 - ESXi 6 4 Port 1GB Ethernet Adapter

[myatix]

 Hi All,

Can anyone recommend a 4 port 1 GB ethernet adapter suitible for an ML 150 G6. 

I have seen the:

NC364T PCI Express Quad Port Gigabit Server Adapter

but I was wondering if this is the only one of if there is anything newer? Please note it doesn't have to be HP it just needs to fit the ML 150 G6 tower and be supported by VMware ESXi 6.0.

Hope someone can help!

Cheers

[Jan Soska]

Hello,

please check your server quickspecs at http://www8.hp.com/h20195/v2/GetPDF.aspx/c04285936.pdf

Page 22:

HP Networking Gigabit Ethernet adapters
HP NC112T PCI Express Gigabit Server Adapter 503746-B21
HP NC360T PCI-E Dual Port Gigabit Server Adapter 412648-B21
HP NC364T PCI-E Quad Port Gigabit Server Adapter 435508-B21
HP NC373F PCI-E Multifunction 1000SX Gigabit Svr Adapter 394793-B21
HP NC373T PCI-E Multifunction Gigabit Server Adapter 394791-B21
HP NC375T PCI Express Quad Port Gigabit Server Adapter 538696-B21
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter 458492-B21

yes - your is among them.

BUT - please have on mind your server is oficially supported maximally to VMware ESX 5.1! - check matrix at http://h17007.www1.hp.com/us/en/enterprise/servers/supportmatrix/vmware.aspx#.VhFpfmp3Zv0 , so you will not have support for any hw issues running ESX 5.5-6.0 ....

Best regards

Jan