HP P2000 G3 Dual Controller 4 port iSCSi ip addresse's cannot be ping from same network.

[Atif Noor]

HP P2000 G3 Dual Controller 4 port iSCSi  ip addresse's cannot be ping from same network or even direct attach

Hi all we have a P2000 iSCSI SAN. we  have connected all the ports and the two management interfaces. We can get to the management interfaces. All the iSCSI ports are addressed and connected. I can ping only the management interfaces from other devices on my network but I can't get ping from the iSCSi ports/ip's. And the iSCSI initiator can not be connected to the SAN at all.

are we missing any configuration step or any utility/software requires in order to get iSCSi port ip's get ping.

Kindly note that iSCSi ports are 1GE ports

Kindly also note the Host Discovered status as no in the snap attached with this post

Kindly Help Us in this Regards,

Thanks & Regards,

Atif Noor

[Ali]

Hi,

following docs may be of some help

http://www.hp.com/hpinfo/newsroom/press_kits/2010/JustRightITopk/best_practices_P2000.pdf

Check the troubleshooting section of this guide:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02006876/c02006876.pdf

How to Say Thanks... Click on Star Kudos

Cheers!

Aftab