HP ProLiant DL360 Gen 5 - adding hard drives.

[roryirl]

I have the above server with a Smart Array P400 Controller, I have fully populated the array with hard drives but its not recognising the last two drives I've added, is there something that needs to be enabled on ilo to enable the two drives, or do the drives need to be connected to the system, first time I've used this type of array.

[Suman_1978]

Hi,

Use Array Configuration Utility to add new drives into Array.

http://www.hp.com/ctg/Manual/c00709035.pdf

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Useful Links for ProLiant Servers